Landing accidents and runway overruns
Added to the Watchlist on 16 August 2010
Problem
Landing accidents and runway overruns continue to occur at Canadian airports.
Background
Millions of landings occur each year on Canadian runways. Rain, snow, ice or slush can contaminate these runways and affect the landing distance. Pilots are required to calculate landing distance before each landing. To do this, they need to have an accurate report of runway surface conditions. If this information is not available, landing distance calculations could be incorrect, putting aircraft at risk of running off the end or the side of the runway.
If this happens, it is important that an aircraft have an adequate safety area beyond the runway's end. At some airports, however, this is not the case, and the terrain beyond the end of the runway could contribute to aircraft damage and injuries to passengers and crew. This area, therefore, must be sufficiently clear of obstacles and properly graded.
The Transportation Safety Board of Canada (TSB) has investigated a number of landing accidents and incidents that highlight the need for runway surface condition reporting and safety areas.Footnote 1Moreover, since the TSB first placed this issue on its Watchlist, the number of accidents of this type every year has not significantly decreased: in 2010, there were 12 such accidents, and in 2011, there were 9.Footnote 2 Meanwhile, in Canada, there is no requirement to meet international standards and recommended practices for safety areas.
Solution
In bad weather, pilots need to receive timely information about runway surface conditions. Furthermore, airports need to lengthen the safety areas at the end of runways or install other engineered systems and structures to safely stop planes that overrun.