Language selection

Pipeline transportation safety investigation P18H0034

Update: The TSB has completed this investigation. The report was published on 14 February 2019.

Table of contents

Release of crude oil

Trans Mountain Pipeline ULC
Darfield Pump Station
Darfield, British Columbia

View final report

The occurrence

On , a 1-inch nipple on a flow meter at Trans Mountain Corporation’s Darfield Station north of Kamloops, British Columbia, leaked crude oil. An estimated 4.8 cubic metres of product was released onto station property. The oil spray affected some vegetation outside of the corporation’s property. No injuries were reported and there was no fire.

Media materials

News release

2019-02-14

Investigation report: May 2018 pipeline oil spill near Kamloops, British Columbia
Read the news release


Investigation information

Map showing the location of the occurrence

Investigator-in-charge

Photo of Jennifer Philopoulos

Jennifer Philopoulos has 15 years of experience in the Oil and Gas industry. She joined the TSB in 2015 as a pipeline engineering expert and senior investigator based out of the Dartmouth, NS regional office. She holds a bachelor’s degree in Metallurgical Engineering from Dalhousie University.

Prior to joining the TSB, Jennifer began her career with Shell at their Oil Sands Upgrading facility, as a site materials and corrosion engineer. Most recently, she has worked as a consulting engineer, providing materials and corrosion expertise to the Oil and Gas industry.

Her experience has focused on corrosion assessments evaluating the conditions of materials in refineries and pipelines in order to prevent premature failures. This includes performing and developing risk based inspection programs, preventative maintenance programs and supporting fitness for service assessments. She has also preformed and supported metallurgical forensic work on various failed components.


  Download high-resolution photos from the TSB Flickr page.

Class of investigation

This is a class 4 investigation. These investigations are limited in scope, and while the final reports may contain limited analysis, they do not contain findings or recommendations. Class 4 investigations are generally completed within 220 days. For more information, see the Policy on Occurrence Classification.

TSB investigation process

There are 3 phases to a TSB investigation

  1. Field phase: a team of investigators examines the occurrence site and wreckage, interviews witnesses and collects pertinent information.
  2. Examination and analysis phase: the TSB reviews pertinent records, tests components of the wreckage in the lab, determines the sequence of events and identifies safety deficiencies. When safety deficiencies are suspected or confirmed, the TSB advises the appropriate authority without waiting until publication of the final report.
  3. Report phase: a confidential draft report is approved by the Board and sent to persons and corporations who are directly concerned by the report. They then have the opportunity to dispute or correct information they believe to be incorrect. The Board considers all representations before approving the final report, which is subsequently released to the public.

For more information, see our Investigation process page.

The TSB is an independent agency that investigates air, marine, pipeline, and rail transportation occurrences. Its sole aim is the advancement of transportation safety. It is not the function of the Board to assign fault or determine civil or criminal liability.