Air transportation safety investigation A15H0002

The TSB has completed this investigation. The report was published on 18 May 2017.

Table of contents

    Collision with terrain
    Air Canada
    Airbus Industrie A320-211, C-FTJP
    Halifax/Stanfield International Airport
    Halifax, Nova Scotia


    The occurrence

    On 29 March 2015, an Air Canada Airbus A320-200 aircraft (registration C-FTJP, serial number 233), was being operated as Flight AC624 from Toronto, Ontario, to Halifax, Nova Scotia, with 133 passengers and 5 crew on board.

    The aircraft was flying the localizer approach procedure to land on Runway 05 at the Halifax Stanfield International Airport. A localizer approach only provides pilots with lateral guidance to align the aircraft with the runway for landing. During the approach, the engines of the aircraft severed power transmission lines, and then the main landing gear and rear fuselage impacted the snow-covered ground about 225 metres before the runway threshold. The aircraft continued through a localizer antenna, then impacted the ground in a nose down attitude, about 70 metres before the threshold. It then bounced and slid along the runway, coming to rest on the left side of the runway about 570 metres beyond the threshold.

    The passengers and crew evacuated the aircraft; 25 people sustained injuries and were taken to local hospitals. The aircraft was substantially damaged. There was no post-crash fire.

    Media materials

    News releases

    2017-05-18

    Airline approach procedures, snowstorm and airfield lighting were factors in March 2015 collision with terrain in Halifax, Nova Scotia
    Read the news release

    2015-06-16

    Ground contact prior to runway threshold of Air Canada Flight 624 during approach to Halifax Stanfield International Airport (A15H0002)
    Read the news release

    2015-03-30

    Collision with terrain involving an Air Canada Airbus A320 at Stanfield International Airport, Halifax, Nova Scotia
    Read the news release

    Backgrounders

    Speeches

    2017-05-18

    News conference for the release of Aviation Investigation Report A15H0002: Opening remarks
    Kathy Fox, TSB Chair
    Doug McEwen, TSB Investigator-in-Charg

    Deployment notice

    2015-03-29

    TSB deploys a team to a runway excursion involving an Air Canada aircraft that occurred at the Halifax International Airport in Nova Scotia

    Dartmouth, Nova Scotia, 29 March 2015 - The Transportation Safety Board of Canada (TSB) is deploying a team to a runway excursion involving an Air Canada Airbus A320 aircraft that occurred at the Halifax International Airport, Halifax, Nova Scotia. Approach-and-landing accidents are on our Watchlist. The TSB will gather information and assess the occurrence.

    Animations

    2017-05-18

    A15H0002: Collision with terrain at the Halifax Stanfield International Airport


    Investigation information

    Map showing the location of the occurrence

    A15H0002

    Collision with terrain
    Air Canada
    Airbus Industrie A320-211, C-FTJP
    Halifax/Stanfield International Airport
    Halifax, Nova Scotia


    Investigator-in-charge

    Image
    Photo of Doug McEwen

    Doug McEwen joined the Transportation Safety Board of Canada (TSB) in April 1998 as a regional investigator - Technical in the TSB's Pacific regional office in Richmond, British Columbia.

    Prior to joining the TSB, he worked as an aircraft maintenance engineer. During that time, he was involved in the maintenance and modification of a variety of aircraft, primarily in the aerial application business.

    Since joining the TSB, Mr. McEwen has participated in a number of major investigations, including Swissair 111, MK Airlines, Air France and Cougar 491.

    In 2001, he transferred to the TSB's Engineering Branch in Ottawa where he was involved in various air, marine, pipeline, and rail regional investigations.

    Since 2008, Mr. McEwen has been a senior regional investigator - Technical at the Atlantic regional office in Dartmouth, Nova Scotia.


      Download high-resolution photos from the TSB Flickr page.

    Class of investigation

    This is a class 3 investigation. These investigations analyze a small number of safety issues, and may result in recommendations. Class 3 investigations are generally completed within 450 days. For more information, see the Policy on Occurrence Classification.

    TSB investigation process

    There are 3 phases to a TSB investigation

    1. Field phase: a team of investigators examines the occurrence site and wreckage, interviews witnesses and collects pertinent information.
    2. Examination and analysis phase: the TSB reviews pertinent records, tests components of the wreckage in the lab, determines the sequence of events and identifies safety deficiencies. When safety deficiencies are suspected or confirmed, the TSB advises the appropriate authority without waiting until publication of the final report.
    3. Report phase: a confidential draft report is approved by the Board and sent to persons and corporations who are directly concerned by the report. They then have the opportunity to dispute or correct information they believe to be incorrect. The Board considers all representations before approving the final report, which is subsequently released to the public.

    For more information, see our Investigation process page.

    The TSB is an independent agency that investigates air, marine, pipeline, and rail transportation occurrences. Its sole aim is the advancement of transportation safety. It is not the function of the Board to assign fault or determine civil or criminal liability.