Language selection

Air transportation safety investigation A21Q0090

The TSB has completed this investigation. The report was published on 16 May 2022.

Table of contents

Collision with water and capsizing

Privately registered
Piper PA-18S-150 (floatplane), C-FVPZ
Rivière du Lièvre, Ferme-Neuve, Quebec

View final report

The occurrence

On at 1530 Eastern Daylight Time, a privately registered, float-equipped Piper PA-18S-150 aircraft took off from Rivière du Lièvre in Ferme-Neuve, Quebec, bound for Parent, Quebec, with a pilot and a passenger on board.

During takeoff, the pilot lost control of the aircraft and it overturned in the river. The aircraft sustained significant damage, and both occupants were fatally injured. The emergency locator transmitter (ELT) did not activate.


Media materials

News release

2022-05-16

Investigation report: Collision with water and capsizing
Read the news release

Deployment notice

2021-09-25

TSB deployed a team of investigators following an accident involving a small aircraft in Ferme-Neuve (Quebec)

Dorval, Quebec, 25 September 2021 — The Transportation Safety Board has deployed a team of investigators to the site of a fatal accident that occurred yesterday involving a small aircraft in Ferme-Neuve (Quebec). The TSB will gather information and assess the occurrence.


Investigation information

Map showing the location of the occurrence




Investigator-in-charge

Photo of Thierry Bélanger

Thierry Bélanger started his career as a structural technician at the Trenton Military base, where he worked on the Boeing 707 and Hercules, before moving to the Bagotville base where he worked on the CF18. In 1995, Thierry went to Air Canada, where one of his tasks was to work on the refurbishment of Northwest Airlines’ DC-9. In 1996, Thierry joined Bombardier where he held various positions, including those of specialist in the mechanical and avionics customer response centre for the Global Express program, as well as a technician, team leader, supervisor, inspector, preflight mechanic. Since 2006, Thierry has provided technical support, consisting mainly of troubleshooting on all systems of Bombardier business aircraft and more recently on the Airbus A220. Thierry was also part of the rapid response team (GO Team) for incident and accident investigations for the Airbus A220.


Photos


Class of investigation

This is a class 4 investigation. These investigations are limited in scope, and while the final reports may contain limited analysis, they do not contain findings or recommendations. Class 4 investigations are generally completed within 220 days. For more information, see the Policy on Occurrence Classification.

TSB investigation process

There are 3 phases to a TSB investigation

  1. Field phase: a team of investigators examines the occurrence site and wreckage, interviews witnesses and collects pertinent information.
  2. Examination and analysis phase: the TSB reviews pertinent records, tests components of the wreckage in the lab, determines the sequence of events and identifies safety deficiencies. When safety deficiencies are suspected or confirmed, the TSB advises the appropriate authority without waiting until publication of the final report.
  3. Report phase: a confidential draft report is approved by the Board and sent to persons and corporations who are directly concerned by the report. They then have the opportunity to dispute or correct information they believe to be incorrect. The Board considers all representations before approving the final report, which is subsequently released to the public.

For more information, see our Investigation process page.

The TSB is an independent agency that investigates air, marine, pipeline, and rail transportation occurrences. Its sole aim is the advancement of transportation safety. It is not the function of the Board to assign fault or determine civil or criminal liability.